OMRON IA Global
Find out information related to Programmable Terminals / Human Machine Interface.
RoHS Compliant Status
Discontinuation and Replacement
View frequently asked questions in your country.
Is it possible to connect multiple PLCs to a single PT?
A message saying the system is being initialized is being displayed. How can I restore operation?
When multiple PTs are connected to a PLC with 1:N NT Link communications and an error occurred in one of the PTs, is it possible to detect that error from the PLC?
What are the specifications of the NT-AL001 RS232C/RS-422A Link Adapter?
What method is used to store the screens in the NT30, NT31, NT620, and NT631?
What is the baud rate of high-speed 1:N NT Link communications? Also, how can I switch communications from the standard NT Link protocol?
Can I use the Windows version of the NT Support Software to correct screen data that was originally created with the DOS version of the NT Support Software?
In the NS-series PTs, is there a way to create a group of buttons so that all of the other buttons go OFF when one of the buttons is ON (i.e., only 1 button can be ON at a time)?
There are two serial ports on the NS-series PT, but can both ports communicate at the same time?
Can the PLC’s ladder diagram be displayed on an NS-series PT?
The NS-series PT is not equipped with an RS-422A port, so how can it communicate beyond the rated distance for RS-232C (15 m)?
How can I import I/O comments that were created with the CX-Programmer into the NT-ZJCMX1-EV4 NT Support Tool?
Can I create screens for NT-series PTs in the NS-Designer?
What cables are used to connect the CX-Simulator to an OMRON Programmable Terminal to operate the Programmable Terminal?
What Programmable Terminals can be used with the NT Support Tool?
Is the NT Support Tool compatible with Windows 2000 or XP? How compatible is it with older versions of Windows?
Which cable can I use to transfer the screen data or system program?
How can the NT system program be reinstalled?