|
|
 |
 |
|
Product Index ::
Automation Systems
:: Programmable Controllers ::
Rack PLCs
|
SYSMAC CS1D Programmable Controller (Duplex System)
|
|
|
|
* Ordering information
* Specifications
* Configurations
* Dimensions, and etc
|
|
can be found in our PDF brochure.
|
|
Introducing the Duplex
CPU, Dual I/O Expansion System!
Adding redundancy in the system is an
effective step to reduce risk.
To respond to customer's needs regarding system reliability, OMRON applied
its proven duplex PLC technology to the CS Series to provide a highly
reliable PLC System.
These PLC Systems have redundant vital components (such as CPUs, power
supplies, networks, and expansion cables), while retaining the CS1-series
functions and capabilities that are suitable for a wide variety of
applications.
|
|
Product
Lineup |
|
With the CS1D, you can select
from a variety of redundant systems.
In addition to duplexed CPU Units and Power
Supply Units, the customer can duplex other components, such as
Communications Units (Controller Link or Ethernet) and Expansion Cables,
to match the system requirements and provide a diverse range of duplex
system configurations.
SYSTEM 1: Duplex CPU, Dual
I/O Expansion System
The entire system can be duplexed, including
a Duplex CPU System, Expansion System, and Expansion Cables, for superior
redundancy and maintainability.
SYSTEM 2: Duplex CPU, Single
I/O Expansion System
The main system components (such as the CPU Units, Power Supply Units, and
Communications Units) can be duplexed and a Programming Device can be used
to replace the Units during operation. This system is equivalent to the
previous Duplex CPU System.
SYSTEM 3: Single CPU System
This system is ideal when you want to improve network redundancy and
replace a Power Supply Unit or other Units online. The CPU Unit cannot be
duplexed.
|
|
Features |
The CS1D supports a variety of network
configurations.
Ethernet can be duplexed as well as
Controller Link, which both have a proven track record in FA applications.
In addition, a variety of networks are available for lower-level I/O,
including DeviceNet, CompoNet, and the MECHATROLINK-II Motion Controller
network. Both DeviceNet and CompoNet are open networks that boast a proven
track record with the CS1 Series.
* Click on the picture
above to enlarge and view more details.
|
Equipped with New Functions
for Maintenance!
Special Programming
Devices and Displays are not required for Online Unit Replacement.
Units and Expansion
Backplanes can be added online.
-
Functions can be added easily after the
system has started operating, even if the system cannot be turned OFF or
stopped.
-
Adjustments and improvements can be easily
made when setting up new systems without turning OFF the power.
While online, a Unit can be added easily to an empty slot. (This
function is supported in Duplex CPU Single I/O Expansion Systems and
Duplex CPU Dual I/O Expansion Systems.)
In addition, an Expansion Backplane as well as its mounted Units can be
added easily.
|
Even Stronger Redundancy!
Expansion Cables can be
duplexed and Units can be replaced Online.
By duplexing the Expansion Units and
Expansion Cables, the Expansion Cables are duplexed and can be replaced
during operation. In addition, cable disconnections are monitored so
failures can be located easily.
Duplex Units can be
replaced online.
|
|
|
 top |
See Related Products:
|
Ethernet Unit
CS1D-ETN21D
Supports message service between PLCs
or between a computer and PLC. |
|
|
 |
|
Clearance Centre
