ZX2

Model	ZX2-LD50L	ZX2-LD50	ZX2-LD100L	ZX2-LD100
Optical system	Diffuse reflective
Light source (wave length)	Visible-light semiconductor laser with a wavelength of 660 nm and an output of 1mW max.
	IEC/EN class 1, FDA class 1 *5
Measurement center point	50 mm		100 mm
Measurement range	±10 mm		±35 mm
Beam shape	Line	Spot	Line	Spot
Beam size *1	Approx. 60 μm × 2.6 mm	Approx. 60 μm dia.	Approx.110 μm × 2.7 mm	Approx.110 μm dia.
Resolution *2	1.5μm		5μm
Linearity *3	±0.05% F.S. (40 to 50 mm)	±0.1% F.S. (40 to 50 mm)	±0.05% F.S. (65 to 100 mm)	±0.1% F.S. (65 to 100 mm)
Temperature characteristic *4	0.02% F.S./°C
Ambient illumination	Incandescent lamp: 10,000 lx max. (on light receiving side)
Ambient temperature	Operating: 0 to 50 °C, Storage: -15 to 70 °C (with no icing or condensation)
Ambient humidity	Operating and storage: 35% to 85% (with no condensation)
Dielectric strength	1,000 VAC, 50/60 Hz for 1 min.
Vibration resistance (destruction)	10 to 150 Hz, 0.7-mm double amplitude, 80 min. each in X, Y, and Z directions
Shock resistance (destruction)	300 m/s2 3 times each in six directions (up/down, left/right, forward/backward)
Degree of protection	IEC60529, IP67
Connection method	Connector connection (standard cable length: 500 mm)
Weight (packed state)	Approx. 160 g (main unit only: Approx. 75 g)
Materials	Case and cover: PBT (polybutylene terephtahalate), Optical window: Glass, Internal thread: Brass, Cable: PVC
Accessories	Instruction sheet, Ferrite core ×1 (made by TDK Corp. ZCAT1730-0730A), Laser warning label (English), FDA

Model	ZX2-LD50V
Optical system	Regular reflective
Light source (wave length)	Visible-light semiconductor laser with a wavelength of 660 nm and an output of 0.24 mW max. IEC/EN class 1, FDA class 1 *5
Measurement center point	48 mm
Measurement range	±5 mm
Beam shape	Spot
Beam size *1	Approx. 60 μm dia.
Resolution *2	1.5 μm
Linearity *3	±0.3%F.S. (entire range)
Temperature characteristic *4	0.06%F.S./°C
Ambient illumination	Incandescent lamp: 10,000lx max. (on light receiving side)
Ambient temperature	Operating: 0 to 50 °C, Storage: -15 to 70 °C (with no icing or condensation)
Ambient humidity	Operating and storage: 35% to 85% (with no condensation)
Dielectric strength	1,000 VAC, 50/60 Hz for 1 minute
Vibration resistance (destruction)	10 to 150 Hz, 0.7-mm double amplitude, 80 minutes, each in X,Y,and Z directions
Shock resistance (destruction)	300 m/s2 3 times each in six directions (up/down,left/right,forward/backward)
Degree of protection	IEC 60529, IP67
Connection method	Connector connection (standard cable length: 500 mm)
Weight (packed state)	Approx.160g (Sensor Head only: Approx.75g)
Materials	Case and cover: PBT (polybutylene terephtahalate), Optical window: Glass, Internal thread: Brass, Cable: PVC
Accessories	Instruction sheet, Ferrite core ×1 (made by TDK Corp. ZCAT1730-0730A), Laser warning label (English), FDA

Note: False detection outside the measurement range can occur in the case of an object with high reflectance.
*1. Beam size: Defined as 1/e² (13.5 %) of the center optical intensity at the minimum value of the measurement
       range (effective value).
       False detections can occur in the case there is light leakage outside the defined region and the surroundings of the
       target object have a high reflectance in comparison to the target object. Correct measurements may not be
       obtained if the workpiece is smaller than the beam size.
*2. Resolution: indicates the degree of fluctuation (±3σ) of analog output when connected to the ZX2-LDA.
       (The measured value is given for the center distance for OMRON’s standard target object (diffuse-reflective models:
       white ceramic object, regular-reflective models:1/4 λ flat mirror) when the response time of the ZX2-LDA is set to
       128 ms.)
       Indicates the repetition accuracy for when the workpiece is in a state of rest. Not an indication of distance accuracy.
       Resolution performance may not be satisfied in a strong electromagnetic field.
*3. Linearity: indicates the error with respect to the ideal straight line of the displacement output in the case of
       measuring Omron's standard target object. Linearity and measured value may vary depending on target object.
       F.S. indicates the full scope of the measurement range. (ZX2-LD50(L): 20 mm)
*4. Temperature characteristic: Value for the case the space between the sensor head and Omron’ s standard target
       object is secured by an aluminum jig. (Measured at the measurement center distance)
*5. These Sensors are classified as Class 1 under EN 60825-1 and the regulations of Laser Notice No. 56 for FDA
       certification.
       CDRH registration has been completed.

Model	ZX2-LDA11	ZX2-LDA41
Measurement period *1	Min. 30 μs
Response time	60 μs, 120 μs, 240 μs, 500 μs, 1 ms, 2 ms, 4 ms, 8 ms, 12 ms, 20 ms, 36 ms, 66 ms, 128 ms, 250 ms, 500ms
Analog output *2	4 to 20 mA, Max. load resistance: 300Ω/±5 VDC or 1 to 5 VDC, Output impedance: 100Ω
Judgement outputs (HIGH/PASS/LOW: 3 outputs), error output	NPN open-collector outputs, 30 VDC, 50 mA max. (residual voltage: 1 V max. for load current 10 mA max., 2V max. for load current above 10 mA)	PNP open-collector outputs, 30 VDC, 50 mA max. (residual voltage: 1 V max. for load current 10 mA max., 2 V max. for load current above 10 mA)
Laser OFF input, zero reset input, timing input, reset input, bank input	ON: Short-circuited with 0-V terminal or 1.2 V or less OFF: Open (leakage current: 0.1 mA max.)	ON: Supply voltage short-circuited or supply voltage within -1.2 V OFF: Open (leakage current: 0.1 mA max.)
Functions	Smart tuning, scaling, sample hold, peak hold, bottom hold, peak-to-peak hold, self-peak hold, self-bottom hold, average hold, zero reset, On-delay timer, OFF-delay timer, keep/ clamp switch, (A-B) calculations *3, thickness calculation *3, mutual interference prevention *3, laser deterioration detection, bank function (4 banks), differential function
Indications	Judgement indicators: HIGH (orange), PASS (green), LOW (orange), 11-segment main display (red), 11-segment sub-display (orange), laser ON (green), zero reset (green), enable (green), menu (green), HIGH threshold (orange), LOW threshold (orange)
Power supply voltage	10 to 30 VDC, including 10% ripple (p-p)
Power consumption	3,000 mW max. (at 24 VDC: 125 mA max., at 12 VDC: 250 mA max.)
Ambient temperature	Operating: 0 to 50 °C, Storage: -15 to 70 °C (with no icing or condensation)
Ambient humidity	Operating and storage: 35% to 85% (with no condensation)
Dielectric strength	1,000 VAC, 50/60 Hz for 1 min.
Vibration resistance (destruction)	10 to 150 Hz, 0.7-mm double amplitude, 80 min. each in X, Y, and Z directions
Shock resistance (destruction)	300 m/s2 3 times each in six directions (up/down, left/right, forward/backward)
Degree of protection	IEC60529, IP40
Connection method	Prewired (standard cable length: 2 m)
Weight (packed state)	Approx. 200 g (main unit only: Approx. 135 g)
Materials	Case: PBT (polybutylene terephtahalate), Cover: Polycarbonate, Display: Methacrylic resin, Button: Polyacetal, Cable: PVC
Accessories	Instruction sheet

*1. In the case of Omron’s standard target object (white ceramic)
*2. Select current output (4 to 20 mA) and voltage output (±5V or 1 to 5V) by MENU mode.
*3. Calculating unit (ZX2-CAL) is necessary. Calculations are possible for up to two amplifier units. Mutual interference
      prevention is possible for up to five amplifier units.

Model	ZX2-CAL
Applicable Amplifier Units	ZX2-LDA11, ZX2-LDA41
Current consumption	12 mA max. (supplied from the Smart Sensor Amplifier Unit)
Ambient temperature	Operating: 0 to +50°C, storage: -15 to +70°C (with no icing or condensation)
Ambient humidity	Operating and storage: 35% to 85% (with no condensation)
Connection method	Connector
Dielectric strength	1,000 VAC, 50/60 Hz for 1 minute
Vibration resistance (destruction)	10 to 150 Hz, 0.7-mm double amplitude, 80 minutes, each in X,Y,and Z directions
Shock resistance (destruction)	300 m/s2 3 times each in six directions (up/down, left/right, forward/backward)
Materials	Case: ABS, Display: Methacrylic resin
Weight (packed state)	Approx. 50g (Calculating Unit only: Approx. 15g)
Accessories	Instruction sheet

Model			ZX2-SF11
Power supply voltage			10 to 30 V DC ±10% (including 10% ripple (p-p)) (Supplied from Sensor Amplifier.)
Power consumption			720 mW max. (at 24 V: 30 mA max., at 12 V: 60 mA max.) (Not including Sensor Amplifier current consumption or output current
Applicable Amplifier Units			ZX2-LDA[][] (Production after November 2013)
Applicable Amplifier Unit versions			Sensor Amplifier Unit version: V1.330 or higher (The Sensor Amplifier version is shown on the sub-digital display when the power of the Sensor Amplifier is turned ON.)
Max. No. of Amplifier Units			5
Commu- nications functions	Port		RS-232C (9-pin, D-Sub connector)
	Communications method		Full duplex
	Synchronization method		Start/stop synchronization
	Transmission code		ASCII
	Baud rate		38,400 (at shipping)/9,600 bps switchable
	Data bit length		8 bits
	Parity check		None
	Stop bit length		1 bit
	Data delimiter	Receiving	CR or CR + LF is automatically recognized.
		Sending	CR + LF fixed
Indicators			Power supply: green, Sensor communications: green, Sensor communications error: red, External terminal communications: green, External terminal communications error: red
Protective circuits			Power supply reverse polarity protection
Ambient temperature			Operating: 0 to 50°C, storage: -15 to 60°C (with no icing or condensation)
Ambient humidity			Operating and storage: 35% to 85% (with no condensation)
Insulation resistance			20 MΩ min. (at 500 VDC)
Dielectric strength			1,000 VAC, 50/60 Hz for 1 min, Leakage current: 10 mA max.
Materials			Case: PBT (polybutylene terephthalate), Cover: Polycarbonate
Accessories			Instruction sheet, 2 clamps