UL Certification for Wireless / RFID Systems
Wireless
Components
|
Model |
Ratings |
File No. |
|
WD30-ME/-SE
WD30-ME01/-SE01 |
11 to 25V DC |
E95399 |
|
WT30-M01-FLK
WT30-SID16
WT30-SMD16
WT30-SMD16-1 |
24 VDC |
WE70-AP
WE70-CL |
The WD30/WT30 have a DC power supply. Be sure the
following conditions are met.
Connect to one of the following circuits ((1) or (2)).
(1) Limited-voltage/current circuit conforming to UL508
A circuit that uses, as the power supply, the secondary wiring of an insulating
transformer
Maximum voltage (no-load state): 30 Vrms (42.4 V peak) max.
Maximum current:
1) 8 A max. (including short-circuited state) or
2) The current is limited with a circuit-protection device (e.g., fuse) of the
ratings shown in the following table:
|
No-load voltage (V peak) |
Maximum current rating (A) |
|
0 to 20 |
5.0 |
|
Greater than 20 V peak,
no greater than 30 V peak |
100/Peak voltage |
(2) A Class 2 power supply unit conforming to
UL1310 or circuit with maximum voltage of 30 Vrms (42.4 V peak) that uses, as
the power supply, a Class 2 transformer to conforming UL1585.
Code
Readers
|
Model |
File No. |
Ratings |
|
V530-R150V3 |
E104818 |
See below. |
The
above models have a DC power supply. Be sure the following conditions are met.
Connect to one of the following circuits ((1) or (2)).
(1) Limited-voltage/current circuit conforming to UL508
A circuit that uses, as the power supply, the secondary wiring of an insulating
transformer
Maximum voltage (no-load state): 30 Vrms (42.4 V peak) max.
Maximum current:
1) 8 A max. (including short-circuited state) or
2) The current is limited with a circuit-protection device (e.g., fuse) of the
ratings shown in the following table:
|
No-load voltage (V peak) |
Maximum current rating (A) |
|
0 to 20 |
5.0 |
|
Greater than 20 V peak,
no greater than 30 V peak |
100/Peak voltage
value |
(2) A
Class 2 power supply unit conforming to UL1310 or circuit with maximum voltage
of 30 Vrms (42.4 V peak) that uses, as the power supply, a Class 2 transformer
to conforming UL1585
Note:
Listing approvals
RFID Systems
The
above models have a DC power supply. Be sure the following conditions are met.
Connect to one of the following circuits ((1) or (2)).
(1) Limited-voltage/current circuit conforming to UL508
A circuit that uses, as the power supply, the secondary wiring of an insulating
transformer
Maximum voltage (no-load state): 30 Vrms (42.4 V peak) max.
Maximum current:
1) 8 A max. (including short-circuited state) or
2) The current is limited with a circuit-protection device (e.g., fuse) of the
ratings shown in the following table:
|
No-load voltage (V peak) |
Maximum current rating (A) |
|
0 to 20 |
5.0 |
|
Greater than 20 V peak,
no greater than 30 V peak |
100/Peak voltage
value |
(2) A
Class 2 power supply unit conforming to UL1310 or circuit with maximum voltage
of 30 Vrms (42.4 V peak) that uses, as the power supply, a Class 2 transformer
to conforming UL1585
Note:
Listing approvals
UL Certification on Other
Product Categories
|
Clearance Centre
