Menu
Industrial Automation
E3NX-MA
Smart Fiber Amplifier Units
2-channel Amplifier reduces installation space by half. Downsized Equipment and Control Panels
Related Contents
Application Solutions
last update: June 15, 2018
Fiber Amplifier Units
| Type | Connecting
method |
Appearance | Inputs/
outputs |
Model | ||
|---|---|---|---|---|---|---|
| NPN output | PNP output | |||||
| 2-channel
models *2 |
Standard Type | Pre-wired (2 m) |  |
2 outputs | E3NX-MA11 | E3NX-MA41 |
| Wire-saving
Connector |
 |
2 outputs | E3NX-MA6 | E3NX-MA8 | ||
| Model for Sensor
Communications Unit *1 |
Connector for Sensor
Communications Unit |
 |
--- | E3NX-MA0 | ||
*1. A Sensor Communications Unit is required if you want to use the Fiber Amplifier Unit on a network.
*2. Two Fiber Units can be connected to one Fiber Amplifier Unit.
Accessories (Sold Separately)
Wire-saving Connectors (Required for models for Wire-saving Connectors.)
Connectors are not provided with the Fiber Amplifier Unit and must be ordered separately. *Protective stickers are provided.
| Type | Appearance | Cable
length |
No. of
conductors |
Model | Applicable Fiber
Amplifier Units |
|---|---|---|---|---|---|
| Master Connector |  |
2 m | 4 | E3X-CN21 | E3NX-MA6
E3NX-MA8 |
| Slave Connector |  |
2 | E3X-CN22 |
Mounting Bracket
A Mounting Bracket is not provided with the Fiber Amplifier Unit. It must be ordered separately as required.
| Appearance | Model | Quantity |
|---|---|---|
 |
E39-L143 | 1 |
DIN Track
A DIN Track is not provided with the Fiber Amplifier Unit. It must be ordered separately as required.
| Appearance | Type | Model | Quantity |
|---|---|---|---|
 |
Shallow type, total length: 1 m | PFP-100N | 1 |
| Shallow type, total length: 0.5 m | PFP-50N | ||
| Deep type, total length: 1 m | PFP-100N2 |
End Plate
Two End Plates are provided with the Sensor Communications Unit. End Plates are not provided with the Fiber Amplifier Unit. They must be ordered separately as required.
| Appearance | Model | Quantity |
|---|---|---|
 |
PFP-M | 1 |
Related Products
Sensor Communications Units
| Type | Appearance | Model |
|---|---|---|
| Sensor Communications Unit for EtherCAT |  |
E3NW-ECT |
| Sensor Communications Unit for CC-Link |  |
E3NW-CCL |
| Distributed Sensor Unit * |  |
E3NW-DS |
Refer to your OMRON website for details.
* The Distributed Sensor Unit can be connected to any of the Sensor Communications Units.
EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.
CC-Link is a registered trademark of Mitsubishi Electric Corporation.
The trademark is managed by the CC-Link Partner Association.
last update: June 15, 2018
Top of page
Products
Menu
About Us
Menu
Solutions
Menu
Privacy
Menu
Services
Menu
Resources
Menu
© Copyright OMRON Corporation 2000-2020. All Rights Reserved.