Menu
Industrial Automation
EE-[]
Photomicro Sensors Accessories
![EE-[]](/Images/nopic-23-136098-198x198.gif)
Connectors and Connector Hold-down Clips
Related Contents
Application Solutions
- Features
- Lineup
- Specifications
- Dimensions
- Catalog / Manual / CAD / Software
last update: November 9, 2016
| Product | Connector
*1 *4 |
Connector
with Cable *1 |
Connector
with Robot Cable *1 |
Connector
*4 |
Connector
(short- circuited between positive (+) and L ter- minals) *2 *4 |
Connector
with Cable |
|
|---|---|---|---|---|---|---|---|
| Model | EE-1009 | EE-1010 | EE-1010-R | EE-1001 | EE-1001-1 | EE-1006 | |
| Appearance |  |
 |
 |
 |
 |
 |
|
| Contact resistance | 20 mΩ max.
(at 20 mV max., 100 mA max.) |
15 mΩ max. (at 100 VDC max.) | 10 mΩ max.
(100 VDC max.) |
||||
| Insertion/removal
durability *3 |
50 times min. | --- | |||||
| Insertion strength | No. of poles ✕ 6 N max. | 68.6 N max. | 50 N max. | ||||
| Surplus strength
(housing holding strength) |
No. of poles ✕ 0.4 N max. | --- | 20 N max. | ||||
| Standard cable length | --- | 1 m, 2 m | --- | 1 m, 2 m | |||
| Lock strength *3 | No. of poles ✕ 29 N min. | --- | |||||
| Ambient humidity | - 10 to +60 °C | - 10 to +75 °C | - 10 to 60 °C | ||||
| Material | Housing | Polybutylene phthalate (PBT) | |||||
| Contact | Phosphor bronze | ||||||
| Applicable
Photomicrosensors |
EE-SX67[] (A, P, R) (Connector Models only), EE-SX47[], EE-SY67[], EE-SPY31[]/41[],
EE-SPX303N/403N, EE-SPW311/411 |
||||||
| Product | Connector *4 | Connector
with Cable |
Connector
with Cable |
Connector with
Robot Cable |
Connector
with Cable |
Connector with
Robot Cable |
|
|---|---|---|---|---|---|---|---|
| Model | EE-1002 | EE-1003 | EE-1013 | EE-1016-R | EE-1017 | EE-1017-R | |
| Appearance |  |
 |
 |
 |
 |
||
| Contact resistance | 10 mΩ max.
(at 10 mADC and 1 ADC) |
20 mΩ max. (at minute
current of 1 kHz and 500 VDC) |
25 mΩ max.
(at 10 mA DC and 20 mV max.) |
||||
| Insertion strength | 20 N max. | 23.5 N max. | 40 N max. | 20 N max. | |||
| Surplus strength
(housing holding strength) |
15 N max. (initial)
10 N max. (ten times) |
3.5 N max. | 10 N max. | 15 N min. | 1.5 N min. | ||
| Cable length | --- | 1 m | 2 m | 1 m, 3 m | |||
| Ambient humidity | -10 to +75°C | -10 to +60°C | -10 to +55°C | -25 to +85°C | -10 to +60°C | ||
| Material | Housing | Nylon | |||||
| Contact | Phosphor bronze (solder plating) | ||||||
| Applicable
Photomicrosensors |
EE-SPX301/401,
EE-SPY30[]/40[], EE-SPZ301-A/401-A |
EE-SPX74[]/84[] | EE-SX95[]-C1J-R | EE-SX97[]C1,
EE-SX97[]P-C1 |
|||
![EE-[] Specifications 3](/Images/447_sp_323-112666.gif)
*1. The Connector has a built-in locking mechanism. To remove the Connector from the Sensor,
grip the top and bottom of the Connector housing, as shown in the following diagram, and
then pull out the Connector.
*2. EE-SX67[] and EE-SY67[] are the best used in the light-ON state.
*3. The insertion/removal durability and lock strength apply only to the lock mechanism.
They do not apply to the EE-1001, EE-1001-1, and EE-1006, which do not have lock
mechanisms.
*4. Do not store the type EE-1009, EE-1001, EE-1001-1 and EE-1002 under the following
conditions since their terminals may discolor.
(1) In the place exposed to the direct sunlight, the high temperature or high humidity.
grip the top and bottom of the Connector housing, as shown in the following diagram, and
then pull out the Connector.
*2. EE-SX67[] and EE-SY67[] are the best used in the light-ON state.
*3. The insertion/removal durability and lock strength apply only to the lock mechanism.
They do not apply to the EE-1001, EE-1001-1, and EE-1006, which do not have lock
mechanisms.
*4. Do not store the type EE-1009, EE-1001, EE-1001-1 and EE-1002 under the following
conditions since their terminals may discolor.
(1) In the place exposed to the direct sunlight, the high temperature or high humidity.
last update: November 9, 2016
Top of page
Products
Menu
About Us
Menu
Solutions
Menu
Privacy
Menu
Services
Menu
Resources
Menu
© Copyright OMRON Corporation 2000-2020. All Rights Reserved.